ESD cabinet housing 27x36E, 564x725x800 mm, clear height 700 mm, KEY Lock without cylinder - Lista 93.307

Building an ESD drawer cabinet to your own specification? This Lista housing in the 27x36E grid provides the base with a 564 x 725 mm footprint and 700 mm of clear height. Drawers are ordered separately. At 800 mm high the housing can take a cover plate and serve as an extra surface right next to the workstation. The KEY Lock comes without cylinder, so the cylinder is chosen separately.

Benefits

• Dissipative surface: All painted surfaces carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• 27x36E grid: external dimensions 564 x 725 x 800 mm and 700 mm clear height, freely fitted with drawers of different front heights.
• KEY Lock, cylinder separate: The lock for an interchangeable cylinder is supplied without cylinder, which you order separately.

Colours

Choose the ESD colour when ordering from the following options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

Typical locations are EPAs in electronics production and EMS, test and repair stations, laboratories and component stores. The dissipative effect requires the cabinet to be properly earthed. The housing is fitted with Lista drawers in the 27x36E format. Matching items in the same format include an ESD synthetic resin cover plate as a top surface, a grooved mat for the top and a three or four sided roll-off edge, the latter with push bar. An ESD castor carrier pair for longitudinal travel turns it into a mobile cabinet.

Notes

For loading drawers and cabinets, follow Lista's assembly instructions and loading regulations. Load capacities apply to evenly distributed loads.