ESD drawer 54x27E, usable 918x459 mm, front height 75 mm, 75 kg, standard with single-drawer interlock - Lista 95.633

With a 75 mm front and 75 kg load capacity, this ESD drawer 54x27E is laid out for SMD components, small parts and flat assemblies. Inside there is 918 x 459 mm of floor space and 57.5 mm of usable height. It is supplied in the standard version including single-drawer interlock.

Benefits

• Lista dissipative paint coating on the painted surfaces drains charges in a controlled way, provided the cabinet is earthed
• Slot grid in 17 mm units on all inner walls for individual subdivision
• 75 kg load capacity with evenly distributed load, for components, tools and material of normal weight
• Standard version including single-drawer interlock
• Combines in any order with drawers of other front heights in the same cabinet housing

Colours

Select the ESD colour of the front when you order:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The drawer fits Lista cabinet housings in the 54 x 27 E grid, in EPA areas of electronics production, at test and repair stations and in component stores. For stationary cabinets the standard version is sufficient. Divider material for the 17 mm slot grid organises the interior for SMD components, small parts and flat assemblies.

Notes

• Observe the Lista assembly instructions and loading rules, the load capacity applies to evenly distributed load.
• The clear height of the cabinet housing determines the selection, the sum of the front heights must equal it.
• Cabinet housing and divider material are not included.