ESD drawer 54x36E, usable 918x612 mm, front height 250 mm, 200 kg, single catch right - Lista 95.794

For mobile or heavily used cabinets in the 54 x 36 E grid: this drawer with a 250 mm front takes 200 kg and is secured individually on the right. 918 x 612 mm and 232.5 mm usable height leave room for larger test instruments, cable reels and upright containers. At 54 E wide, it is the wide variant in the Lista system.

Benefits

• Dissipative surface: The painted parts carry the dissipative paint coating developed by Lista, which drains charges in a controlled way.
• 200 kg capacity: Built for heavy loads, rated for an evenly distributed load.
• Single catch on the right: The right-hand single catch is released with one hand and keeps the drawer shut even when the cabinet is not locked.
• 17 mm slot grid: The inner walls are slotted all round in 17 mm units, so the drawer can be divided freely.

Colours

Choose the ESD colour when you order, from these options:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The drawer fits Lista 54 x 36 E cabinet housings, where it can be combined in any order with drawers of other front heights. Typical locations are EPA areas in electronics manufacturing, test and repair stations and the component store. The dissipative effect requires the cabinet to be properly earthed. Lista partitioning material in the 17 mm grid keeps the contents organised.

Notes

• Observe the Lista assembly instructions and loading rules for loading the drawers. The load capacity applies to an evenly distributed load.
• The clear height of the cabinet housing determines the selection: the sum of all front heights must match it.