ESD workbench 27x36E, 2000x750x850 mm, 5 drawers 1x50/2x100/1x150/1x300, 75 kg, CODE Lock - Lista 95.921

With a width of 2000 mm and a depth of 750 mm, this ESD workbench leaves room for a soldering station, instruments and assemblies, while the 800 mm high cabinet below holds 5 drawers with 700 mm clear height. It locks with the CODE Lock.

Benefits

• Dissipative worktop: 50 mm composite element made of volume conductive chipboard with hard-wearing HPL laminate, top surface light grey NCS S 1500-N, edges with 2 mm ABS banding, grounding set included.
• Dissipative paint coating: The painted parts carry the coating developed by Lista, which drains charges in a controlled way.
• 5 drawers at 75 kg each: usable area 459 x 612 mm, a finely graded layout from 50 mm for small parts up to 300 mm for test equipment.
• CODE Lock: A four to six digit numeric code replaces the key, opening and locking are done by hand.
• Flexible assembly: The drawer cabinet can be fitted on the right or left, and the bench comes pre-assembled with fixing material. Surface load up to 800 kg.

Colours

Choose the ESD colour of frame and cabinet when ordering:

• Light grey RAL 7035
• Pale grey NCS S 2403-Y
• Anthracite grey RAL 7016
• Orange NCS S 1080-Y40R

Use and combination

The workbench is intended for EPAs in electronics production, at EMS providers, test and repair stations and in the laboratory. The dissipative effect requires the top and frame to be properly grounded via the supplied grounding set. To complete the ESD workstation, we supply a wrist strap with coiled cord, grounding box, ESD table mat and floor mat. Warning signs in German or English and floor marking tape identify the EPA.