Counter-electrode 150 x 150 mm with cable for volume resistance tests - Iteco 9265047

The volume resistance of an ESD mat can only be read when the material sits between two electrodes. With its 150 x 150 mm face the counter-electrode 9265.047 forms the lower side of that arrangement, while probe 9265.065 or 9265.070 is placed on top.

Features

• Stainless steel measuring electrode, dimensionally stable and with a contact face that does not age.
• 150 x 150 mm area, large enough to sit fully underneath the footprint of a 63 mm probe.
• Connection through the BNC inner conductor and a red 4 mm socket for the measuring electrode.
• Shield routed over the BNC outer conductor, which keeps interference out of the measuring circuit.
• Cable already attached, so the electrode is ready to use without further accessories.
• Weight of 1.0 kg keeps the electrode in place while the reading is taken.

Technical data

Applications

• Volume resistance measurement of bench mats and floor mats inside the EPA.
• Incoming inspection of ESD flooring against the limits of IEC 61340-5-1.
• Part of the ESD survey kit alongside GigaLab EVO, ring probe and walking test meter.

Compatibility and scope of supply

Supplied as the counter-electrode with cable attached. It works with the GigaLab EVO, GigaLab EVO PLUS, Labeohm EVO and Labeohm EASY meters and with probes 9265.065 and 9265.070.

Standards and origin

For resistance measurements to IEC 61340-5-1. Made in Italy by Iteco.