Lever wire connector Lever 4 mm², 2-port, 0.2-4 mm², pack of 50 - IDEAL 30-0092DE

Joining two conductors in line, for example to extend a cable or connect a luminaire: this 2-port lever connector takes wire from 0.2 to 4 mm² and is rated 32 A at 450 V to IEC 60998. Only 13.3 mm wide, it still fits into crowded junction boxes.

Benefits

• Solid wire goes in without opening the lever, saving steps on repetitive installations.
• Mix flexible wire from 0.14 mm² and solid wire up to 4 mm² in the same connector.
• Lift the lever and pull the wire: the joint can be released and reused when circuits change.
• Inspection window shows whether the conductor is fully inserted.
• Dual rating to IEC 60998 and UL 486C, with CE, UKCA, UL and ENEC approval.

Applications

• Electrical installation: cable extensions, luminaire connections
• Control cabinet and equipment building
• Maintenance and retrofit work

Usage notes

• Turn off power before installing or removing and do not exceed the rating.
• Use only one conductor per port, strip wires back 11-12 mm.
• Rigid stranded and flexible wires: lift the lever, insert the conductor, close the lever. Check that it is fully inserted to the back of the connector.