ESD ball-roller table top QUADRO pass-through, for workpiece carrier 600x600 mm, table width 1650 mm - Karl 55.855.89

Rotate the workpiece or workpiece carrier right at the workstation without lifting it: this pass-through ball-roller table top (in-line mounting) has ball units across the full 1650 mm table width and is mounted on the QUADRO base element for ball-roller table tops. 600 x 600 mm workpiece carriers rotate in 90° steps and are held by integrated clamping elements. The conductive ESD surface integrates the workstation into a complete ESD system to IEC 61340-5-1.

Benefits

• Ball units with chromated Ø 15 mm steel balls across the full table width: carriers enter and leave from both sides.
• Workpiece carriers rotate and lock in 90° steps for ergonomic work on every side of the workpiece.
• Integrated clamping elements hold the carrier in position during assembly.
• Light grey work surface in conductive ESD high-pressure laminate (EN 438) with hard-wearing edge banding.

Matching accessories and variants

• Standard version without ESD: KARL 55.855.88
• Outfeed right, ball units over 2/3 of the table width: KARL 55.853.89
• Outfeed left, ball units over 2/3 of the table width: KARL 55.854.89
• ESD workpiece carrier 600 x 600 mm with top layer: KARL 59.726.98

Applications

• Assembly lines with manual workpiece carrier transport
• Assembly of large units worked on from several sides
• Electronics manufacturing in EPAs