Ball-roller table top SINTRO, left-hand outfeed, for workpiece carriers 400x600 mm, 1230x750 mm - Karl 56.819.88

Turn, fix and divert workpiece carriers to the left out of the transfer line right at the workstation: the KARL SINTRO ball-roller table top carries ball elements across 2/3 of the table width and is matched to workpiece carriers 400 x 600 mm. Table width 1230 mm, depth 750 mm, work surface in high-pressure laminate (EN 438).

Benefits

• Workpiece carrier can be turned and fixed in 90° steps, so the workpiece can be worked on from every side.
• Integrated clamping elements hold the carrier in position during work.
• Inset ball elements with chromated steel balls Ø 15 mm: the carrier moves and turns with little effort.
• Ball elements across 2/3 of the table width with left-hand outfeed, counterpart to the right-hand version.
• Light grey work surface with hard-wearing edge banding.

Matching accessories and variants

• ESD version: KARL 56.819.89
• Counterpart with right-hand outfeed: KARL 56.818.88
• Pass-through table, ball elements across the full width: KARL 56.820.88
• SINTRO table frame 1230 x 750 mm for ball-roller table tops: KARL 25.005.70
• Workpiece carrier 400 x 600 mm with covering: KARL 59.720.98
• SINTRO corner element for workpiece carriers 300 to 600 mm: KARL 56.895.88

Applications

• Assembly workstations in transfer lines where the workpiece is worked on from several sides
• Diverting workpiece carriers to the left to test or rework stations
• Device assembly and subassembly production