Concentric ring probe 63/30 mm 2.3 kg with BNC and three 4 mm sockets - Iteco 9265070

Reading the surface resistance of a mat or a worktop normally takes two probes and two hands. The concentric ring probe 9265.070 carries both measuring electrodes in one body: an inner ring of 30 mm and an outer ring of 63 mm, held down by 2.3 kg of dead weight.

Features

• Two concentric rings of 63 and 30 mm, so one placement replaces two separate probes.
• 2.3 kg dead weight keeps the contact force constant without the operator pressing down.
• One BNC connector and three 4 mm sockets, covering the measuring electrodes and the shield separately.
• Inner ring on the BNC inner conductor and a red 4 mm socket, outer ring on the BNC outer conductor and a black 4 mm socket.
• Shield on a dedicated grey 4 mm socket, which keeps the measuring circuit clean even at teraohm values.

Applications

• Surface resistance measurement of bench tops, mats and floors with a single probe.
• Periodic EPA verification to IEC 61340-5-1 with documented readings.
• Volume resistance measurement together with counter-electrode 9265.047.
• Field work inside the ESD survey kit alongside GigaLab EVO and Walking Test EVO.

Compatibility and scope of supply

Supplied as one probe. It works with GigaLab EVO 9265.063, GigaLab EVO PLUS 9265.066, Labeohm EVO 9265.051 and Labeohm EASY 9265.055. T-handle 9265.072 with M5 thread allows floor readings to be taken standing up, and coaxial cable 9265.008 makes the link to the meter.

Standards and origin

For resistance measurements to IEC 61340-5-1. Made in Italy by Iteco.