Resistance Meter Gigalab EVO Plus with serial interface, up to 1 TOhm - Iteco 9265066

Anyone who wants to evaluate readings rather than copy them by hand needs a data output. The Gigalab EVO Plus is the version of the multi voltage high resistance meter with a serial data interface, otherwise it measures like the base model from 1 kohm to 1 Tohm at four test voltages.

Operating benefits

• Serial data interface reserved for the Plus model, it hands the memory content over to a computer.
• Memory for 100 readings with resistance value, test voltage, humidity and temperature as the basis of the test report.
• Four test voltages of 10, 100, 250 and 500 V, at 500 V with an accuracy of 5 percent plus 0.03 percent per Gohm.
• Shielded cable and shielded probe keep electromagnetic interference out of the measurement.
• Humidity and temperature are recorded alongside, because both strongly influence the resistance of insulating materials.
• Same housing as the base model, 243 x 130 x 60 mm at 650 g, running on 6 alkaline LR6 batteries.

Typical applications

• Audit programmes in which readings are transferred digitally into a test record.
• Trend evaluation of floor and mat resistance across the seasons together with humidity values.
• Point to point and ground resistance measurement inside the EPA to IEC 61340-5-1.
• Testing insulating materials at 500 V up to 1 teraohm.

Compatibility and scope of delivery

The same probes as for the base model fit, the shielded probe 63 mm at 2.3 kg (Iteco 9265.065), the concentric ring probe 63/30 mm at 2.5 kg (Iteco 9265.070), the counter-electrode 150 x 150 mm (Iteco 9265.047) and the 25 cm T-handle (Iteco 9265.072). As a complete case set with two probes the Plus model carries the number Iteco 9265.067, without the interface it is available as Iteco 9265.063.

Standards and origin

Point to point resistance, resistance to ground and surface resistance are determined according to the quantities described in IEC 61340-5-1. A traceable calibration report is enclosed, Iteco handles recalibration under 9265.042. Made in Italy.