Recalibration Labeohm with traceable ISO 9000 calibration report - Iteco 9265003

Within an ESD control programme a resistance meter counts as evidence only while its calibration is valid. This item covers the recalibration of a Labeohm, the instrument is checked at the manufacturer and returns with a traceable ISO 9000 calibration report.

What this item covers

• Recalibration of a Labeohm EASY 9265.055 or Labeohm EVO 9265.051 meter by the manufacturer.
• Traceable ISO 9000 calibration report as proof for audits and customer inspections.
• Check across the full instrument range of 10^4 to 10^12 ohm at the test voltages of 10 V and 100 V.
• Keeps the measurements documented for the EPA to IEC 61340-5-1 meaningful.
• The same service for the Gigalab EVO can be ordered as Iteco 9265.042.

Typical applications

• Annual recalibration as part of test equipment management.
• Proof to customers and auditors that the measuring equipment of the EPA is calibrated.
• Return to service of an instrument that has been in storage for a longer period.
• Calibration after a drop or after conspicuous readings.

Ordering notes

One recalibration is ordered per meter, the instrument itself is not part of this item. Newly delivered meters already include a traceable certificate, recalibration applies to the later test cycles. For instruments of the Gigalab EVO series, Iteco 9265.042 is the matching item.

Standards and origin

The certificate is traceable to ISO 9000 and supports the resistance measurements of the ESD control programme to IEC 61340-5-1. Carried out by the manufacturer in Italy.