DIMMbox external PWM module, IP54, max. 4.0 A, 24V DC - LED2WORK 210700-05

When LED2WORK lighting luminaires need to be dimmed centrally from a machine control system, the external DIMMbox handles the job. The module converts the digital signal from a PLC or other external controller into a PWM signal and uses it to regulate the brightness of a connected 24 V DC LED2WORK luminaire.

Key benefits

• Controls all 24V DC LED2WORK lighting luminaires via an external controller, e.g. a PLC
• Switches up to 96 W at a maximum current load of 4000 mA
• PWM frequency of approx. 4 kHz for low-flicker dimming
• IP54 protection rating for use in industrial environments
• Input M12 A-coded (socket), output M12 A-coded (plug), with ON/OFF switch
• Mounts directly onto T-slot profiles via slotted fixing tabs

Technical data

• Model: LED2WORK DIMMbox
• Design: surface-mounted device with slotted-hole fixing
• Power: 96 W
• Through voltage: 24V DC
• Output voltage: 24V DC
• Max. current load: 4000 mA
• PWM frequency: approx. 4 kHz
• Brightness control: via external controller
• Input/output: M12 A-coded plug / M12 A-coded socket
• ON/OFF switch: yes
• Protection rating (IP): IP54
• Operating temperature: -20 °C to +50 °C
• Storage temperature: -20 °C to +80 °C
• Material: plastic housing
• Dimensions: 122 mm x 33 mm x 29 mm
• Weight: 100 g
• Certifications: CE, UKCA

Applications

Suitable for machines and systems where lighting is to be dimmed centrally from the control system, for example to adapt brightness to different work steps. Matching connection cables for the DIMMbox can be found in the product accessories under Connection and wiring.