Pneumatic random orbital sander APS-125, 10.000 min-1 - Nitto Kohki 74900001

An even finish without visible circular marks needs a motion that never hits the same point the same way twice. These random orbital sanders run a 5 mm orbit at 10,000 rpm and weigh under 0.75 kg.

• A 5 mm orbit at 10,000 rpm produces a fine, non-directional finish across large surfaces.
• Pad sizes of 125 and 150 mm match commonly available abrasive discs in these diameters.
• A weight under 0.75 kg allows one-handed work, including on vertical surfaces.
• Air consumption of 0.45 m³/min applies to both sizes, so changing pad size does not change how the supply is sized.
• A spanner and adaptor bushing are included, so the sander is ready once connected.

Applications

• Preparing surfaces before paint or coating
• Intermediate sanding of primers and fillers
• Levelling filler areas in body repair
• Fine sanding of sheet metal and plastic parts
• Keying surfaces before bonding

Standard accessories

• Spanner 17 : 1 pc.
• Bushing PT1/4 x NPT1/4 : 1 pc.

Operating principle

The pad rotates while being carried on an eccentric offset, so no point on the surface travels the same path twice. The quoted speed is a no-load value.