Proxxon 22402 L-handle-screwdriver HX 2x110
-
This Item:
€4.41Excl. 19% VAT , excl. Shipping Cost
-
Proxxon 22010 FLEX-DOT-screwdriver slot 3.0x0.5x100
€3.03Excl. 19% VAT , excl. Shipping Cost
-
Proxxon 22644 FLEX-DOT-external HX nut screwdriver set (6-piece)
€34.03Excl. 19% VAT , excl. Shipping Cost
For full
professional use!
L-handle screwdrivers
If high torques are required for tightening or loosening screws, the L-handle screwdriver is the solution. The ergonomic and asymmetrical grip simplifies handling under continuous operation. Its two-component design with soft zones reduces pressure marks while at the same time allowing for optimum torque transfer. Easy-to-read sizes on shaft (laser marking) and handle.
Graded grip sizes correspond with the necessary torque of the respective blade size.
With transverse hole for hanging up.
Oil and acid-resistant non-stick special rubber handle.
Easy to read sizes through laser marking process on matte-chrome plated shafts of chrome silicon manganese molybdenum alloy special steel. Continuously hardened and stress-relieved with a balanced ratio of torsional rigidity and toughness.
Processed black tip for greatest precision for accepting screws. Also prevents tool from slipping.
- Graded grip sizes correspond with the necessary torque of the respective blade size.
- With transverse hole for hanging up.
- Oil and acid-resistant non-stick special rubber handle.
- Easy to read sizes through laser marking process on matte-chrome plated shafts of chrome silicon manganese molybdenum alloy special steel. Continuously hardened and stress-relieved with a balanced ratio of torsional rigidity and toughness.
- Processed black tip for greatest precision for accepting screws. Also prevents tool from slipping.
Difficult to access
Allen screws can be screwed
at a working angle of
up to 25° with HX Ball.
When using the screw
socket of the short blade,
the longer shank is used
as "lever" for extreme torque.
L-handle HX screwdrivers
Short blade with sturdy standard HX, long blade with HX Ball (ball head).
NO | HX | A mm | B mm | C mm |
| 22 402 | 2 | 110 | 15 | 55 |
| 22 404 | 2.5 | 110 | 15 | 55 |
| 22 406 | 3 | 110 | 15 | 55 |
| 22 408 | 4 | 110 | 15 | 55 |
| 22 410 | 5 | 160 | 20 | 75 |
| 22 412 | 6 | 160 | 20 | 75 |
| 22 414 | 7 | 160 | 20 | 75 |
| 22 416 | 8 | 200 | 20 | 75 |
| 22 418 | 10 | 215 | 20 | 100 |
L-handle TX screwdrivers
Short blade with sturdy standard TX, long blade with Tamper TX (with frontal hole).
NO | TX | A mm | B mm | C mm |
| 22 440 | 8 | 110 | 15 | 55 |
| 22 442 | 9 | 110 | 15 | 55 |
| 22 444 | 10 | 110 | 15 | 55 |
| 22 446 | 15 | 110 | 15 | 55 |
| 22 448 | 20 | 110 | 15 | 55 |
| 22 450 | 25 | 160 | 20 | 75 |
| 22 452 | 27 | 160 | 20 | 75 |
| 22 454 | 30 | 160 | 20 | 75 |
| 22 456 | 40 | 185 | 20 | 75 |
| 22 458 | 45 | 215 | 20 | 100 |
| 22 460 | 50 | 215 | 20 | 100 |
L-handle HX nut screwdrivers
Optimum blade lengths for working on motors and all kinds of machines. Flats on HX nut allow for use of an open-end spanner to effortlessly loosen tightly locked screws.
NO | HX mm |
| 22 476 | 7 |
| 22 478 | 8 |
| 22 482 | 10 |
| 22 486 | 12 |
| 22 488 | 13 |
L-handle screwdriver sets
With versatile holder for the workshop. Clear specified sizes on the holder for neat storage of L-handle screwdrivers.
| NO | ||
| 22 650 |  | 8-piece L-handle HX set with holder |
| HX 2 - 2.5 - 3 - 4 - 5 - 6 - 8 - 10 | ||
| 22 652 |  | 10-piece L-handle TX set with holder |
| TX 8 - 10 - 15 - 20 - 25 - 27 - 30 - 40 - 45 - 50 |
Siehe auch:
L-Griff-Schraubendrehersätze
| Execution | TEC |
|---|---|
| Manufacturer Nr. | 22402 |
| Manufacturer | Proxxon |
| Country of Manufacture | Germany |
| EAN | 4006274224025 |
| Weight | 0.020000 |
| GPSR manufacturer information | PROXXON S.A. Härebierg 6-10, LU-6868 Wecker, www.proxxon.com |
| Article authenticity | Original product |
| Condition of article | New |
