Sicherung 10A / 5x20mm für z.B. QU861DW, QU862DW+, TR1300A - Quick QUSI10A

Hot air rework stations draw far more current than a hand soldering station. The 861DW is rated 1000 W at 230 V and the TR1300A 1300 W, and that is what the 10 A version of this 5x20 mm cartridge fuse is made for.

Top rating of the range

• 10 A is the highest step in the Quick fuse programme and stays reserved for the units with the largest connected load.
• Assigned to the QU861DW at 1000 W, the QU862DW+ and the industrial TR1300A at 1300 W.
• The 5x20 mm format matches the smaller values of the range, only the rating differs.
• A 10 A fuse must never be used as a stand-in in units rated 1 A or 3 A, which would leave no protection at all.
• Genuine Quick part, shipping weight around 0.01 kg.

Application

Rework benches, board repair and series soldering, wherever hot air stations run continuously and a failure breaks the cycle.

Compatibility

Quick QU861DW, QU862DW+ and TR1300A. Soldering stations and solder pots use the smaller values of the same range at 0.8 A, 1 A and 3 A. The figure printed on the fuse holder of the unit always takes precedence.