Torque wrench MANOSKOP 730/5 Quick 6-50 Nm insert tool holder 9 x 12 mm - Stahlwille 50184005

If you switch frequently between tightening torques, the MANOSKOP 730/5 Quick lets you set the target value in seconds via the locking lever. The measuring range covers 6-50 Nm (5-36 ft·lb). The scale graduation is 2 Nm and the accuracy ± 4%. The target torque is set once and signalled by a clear click on every tightening. Length 315 mm, weight 780 g.

Benefits

• Clicking type with dual stop signal: a clearly perceptible and audible click when the set torque is reached
• No reset to 0 required, the low-wear bending bar system is only under load during tightening
• Quick setting via the easy-to-operate locking lever in the handle, fine tapered pointers, dual scale Nm/ft·lb
• Non-slip adjuster with thumb recess for quick torque adjustment
• QuickRelease safety lock for the insert tools, counter-clockwise tightening by turning the insert tool over
• Clicking mechanism insensitive to continuous loads and counter-loads up to the maximum measuring range

Applications

Assembly, maintenance and repair in aircraft engines, the automotive industry, rail, agricultural machinery, commercial vehicles and wind power. Optimal calibration with perfectControl calibration systems No. 7794 or calibration systems No. 7706, 7791.

Standards

Calibration certificate in accordance with DIN EN ISO 6789-2:2017.