Torque wrench MANOSKOP 730/10 Quick 20-100 Nm insert tool holder 9 x 12 mm - Stahlwille 50184010

If you switch frequently between different tightening torques in service work, the MANOSKOP 730/10 Quick lets you set the target value in seconds via the clamping lever in the handle. The measuring range covers 20-100 Nm (15-72.5 ft·lb) with a scale graduation of 2.5 Nm and an accuracy of ± 4%. Length 370 mm, weight 936 g.

Benefits

• Clicking type with dual stop signal, a clearly perceptible and audible click
• Quick setting via the easy-to-operate clamping lever in the handle, non-slip adjuster with thumb recess
• Fine, tapered pointers and dual scale Nm/ft·lb, also available on request as a Nm only version
• No reset to 0 required, the low-wear bending bar system is only under load during tightening
• QuickRelease safety lock for the insert tools, counter-clockwise tightening by turning the insert tool over
• Easy adjustment without disassembly via 2 external adjustment screws, 2-component handle

Applications

Assembly, maintenance and repair in aircraft engines, the automotive industry, rail, agricultural machinery, commercial vehicles and wind power. Optimal calibration with perfectControl calibration systems No. 7794 or calibration systems No. 7706, 7791.

Standards

Calibration certificate in accordance with DIN EN ISO 6789-2:2017.