Electronic workshop testing device SENSOTORK 7707N-1W 0.4-20 Nm, 1/4 inch internal square - Stahlwille 96521080

Torque wrenches used in production must be checked regularly so that every bolted joint receives the required torque. The SENSOTORK 7707N-1W electronic workshop testing device checks and adjusts indicating and clicking type torque wrenches in the measuring range 0.4-20 Nm via a 1/4 inch internal square, with an accuracy of ± 1%. For clicking type wrenches, the actual final torque applied is also displayed.

Benefits

• 3 operating modes: running display (Track), display on click point detection (First-Peak) and peak value display (Peak-Hold)
• Large LCD for optimum readability, 3 measuring units (N·m, ft·lb, in·lb)
• Controlled clockwise and counter-clockwise measurements, horizontal or vertical orientation
• Low-profile transducers not affected by transverse forces, automatic detection and QuickRelease safety lock
• When a transducer is recalibrated, the tester remains on site and can be used with another transducer
• Particularly broad measurement range from about 2-100 % of the nominal value

Applications

Test equipment monitoring and quality control in production and workshops, testing torque wrenches in wind power.

Standards

Complies with the specifications of guideline DKD-R 10-8 / DIN 51309.