Torque wrench MANOSKOP 730a/40 Fix 60-300 ft·lb insert tool mount 14 x 18 mm, clicking type - Stahlwille 96583040

On a production line every joint has to be tightened to the same torque, and nobody may change the setting unnoticed. The MANOSKOP 730a/40 Fix clicks with a dual stop signal within 60-300 ft·lb (800-3600 in·lb) and is locked against changes once set. Accuracy is ± 3 %.

Benefits

• Adjustment knob can be unscrewed after setting the torque, a TORX Tamper Resistant locking screw and self-adhesive seals protect against tampering, no adjustment without breaking the seal
• Clicking type with dual stop signal, no reset to 0 required, the measuring element is only under load when a force is applied
• Fast, precise adjustment with QuickSelect quick adjustment, dual scale ft·lb/in·lb
• Mount for interchangeable 14 x 18 mm insert tools with QuickRelease safety lock, counter-clockwise tightening by turning the insert tool over
• Clicking mechanism insensitive to continuous loads and counter-loads up to the max. measuring range
• Easy adjustment without disassembly via 2 external adjustment screws, 2-component handle

Applications

Series production and repetitive assembly tasks in aero engines, automotive, rail, agricultural machinery, commercial vehicles and wind power. Calibration with perfectControl calibration systems No. 7794 or calibration systems No. 7706 and 7791.

Standards

Supplied with calibration certificate in accordance with DIN EN ISO 6789-2:2017.