Torque wrench Service MANOSKOP 730N/10 20-100 Nm insert tool mount 9 x 12 mm QuickRelease - Stahlwille 50181010

In the workshop and in service, a target torque has to be set quickly and repeated reliably. The Service MANOSKOP 730N/10 clicks in the range 20-100 Nm (15-75 ft·lb) with a strong haptic and acoustic dual stop signal and works with an accuracy of ± 3%. The target torque is set and locked via the rotary knob at the end of the handle, and no reset to 0 is required.

Benefits

• Low-wear trigger system with bending beam, the measuring element is only under load during tightening
• Dual scale Nm/ft·lb with fine scale graduation of 0.5 Nm
• 9 x 12 mm holder for interchangeable insert tools with QuickRelease safety lock
• Clicking mechanism insensitive to continuous loads and counter-loads (up to the max. measuring range), counter-clockwise tightening by turning the insert tools over
• Easy adjustment without disassembly via 2 external adjustment screws, calibration with perfectControl no. 7794 or no. 7706 and 7791
• 2-component handle

Applications

Controlled bolt tightening in the workshop, in service and in assembly, including aircraft engines, the automotive industry, rail, agricultural machinery, commercial vehicles and wind power.

Standards

Calibration certificate in accordance with DIN EN ISO 6789-2:2017.