UAL 130 wall mount with 130 mm height adjustment and clamp up to 30 mm - Leica UAL 130

On site a single centimetre often decides whether the laser line sits on the datum mark. The Leica UAL 130 clamps to rails, profiles and edges up to 30 mm thick and then lets the Lino travel 130 mm in height on a large gear wheel, finely and without breaking down the set-up.

Key benefits

• 130 mm of height adjustment on a large gear wheel, so the datum line is followed instead of the mount being rebuilt.
• Clamp for rails, profiles and edges up to 30 mm thick, suited to metal stud work and ceiling rails.
• IP54 protection against dust and splash water, plus a drop test from around 2 m.
• 1/4 inch and 5/8 inch tripod threads as standard and large slots for zip ties or nails when there is nothing to clamp to.
• Also takes the Leica TWIST 250 and TWIST 360 magnetic pivoting adapters, which extends it to magnetic surfaces.

Technical data

Applications

Drywall and interior fit-out on metal stud work, suspended ceilings, electrical and plumbing installation on trays and pipes, and tiling or flooring work where the laser height is adjusted repeatedly.

Compatibility and scope of delivery

The UAL 130 is designed for the Leica Lino P5, L2, L2G, L2P5 and L2P5G series. Its 1/4 inch and 5/8 inch threads also take common tripod accessories as well as the Leica TWIST 250 and TWIST 360 magnetic adapters. Delivery covers the UAL 130 wall mount and a quick start guide. The laser is not included.

Origin and marking

Made in China and listed by Leica Geosystems under material number 866131. The EAN is 7640110697931 and the customs tariff number is 9015900000.