Soldering tip chisel 30° 1.78 mm SSC 700 series - Metcal SSC-737A

Everyday electronics work sits between the fine needle and the wide chisel. The SSC-737A covers it with a chisel tip 1.78 mm wide and 9.9 mm long from the SSC 700 series.

Benefits

• Chisel width of 1.78 mm as an all-rounder between fine work and power soldering
• Tip length of 9.9 mm for good access with stable heat transfer
• Fixed tip temperature of 412 °C with no setup effort
• Heater built into the cartridge, tip change in seconds
• SSC 700 series for most standard applications

Applications

Soldering and rework of SOIC and QFP terminations, pin headers, through-hole parts and wire links in production, test and repair.

Compatibility and scope of delivery

The cartridge fits the MFR-H6-SSC handpiece and therefore works on the MFR-1160 and MFR-1161 soldering systems as well as on the SP200 station. Heater and temperature sensor sit inside the cartridge, so no calibration is required. Scope of delivery: one soldering tip cartridge.