Images are for illustration purposes only and may differ from the actual product. Some images have been generated or edited, in whole or in part, using artificial intelligence systems. The technical specifications in the product description are authoritative.
Through-hole components have to be released from the board without damaging the barrel or the pad. The STDC-106 desoldering cartridge of the STDC series works with a 1.52 mm inside diameter and a 2.29 mm outside diameter at a controlled tip temperature of 412 °C. It fits the MX-DS1 hand piece and suits standard desoldering work on through-hole components.
Desoldering cartridge STDC series 1.52/2.29 mm 412 °C - Metcal STDC-106
METCAL Original product
Net price (excl. VAT)
€52.85
Item WL13847
Manufacturer no. STDC-106
Personal expert advice
Brand new Specialist dealer since 2009 Original product Worldwide shipping
Product data
Manufacturer no.STDC-106
ConditionNew
Article
WL13847
Frequently Bought Together
- This Item: €52.85
- Desoldering cartridge long 0.76 mm inside diameter STDC series - Metcal STDC-703L €58.58
- Desoldering cartridge long 0.76 / 1.68 mm 485 °C STDC series - Metcal STDC-803L €89.69
Total price
Through-hole components have to be released from the board without damaging the barrel or the pad. The STDC-106 desoldering cartridge combines heater, sensor and suction channel in one part and delivers a repeatable 412 °C at the tip through SmartHeat control.
Benefits
- Inside diameter 1.52 mm for a close fit around the component lead
- Outside diameter 2.29 mm keeps the heat input to the pad contained
- Tip length 10.41 mm for short lever travel and clear sight
- SmartHeat control at 412 °C without calibration and without a temperature setting
- For the MX-500, MX-5000 and MX-5200 systems with the MX-DS1 hand piece
Technical data
| Item number | WL13847 |
| Model | STDC-106 |
| Manufacturer | Metcal |
| Manufacturer item number | STDC-106 |
| Sales unit | piece |
| Product series | STDC series |
| Inside diameter | 1.52 mm |
| Outside diameter | 2.29 mm |
| Tip length | 10.41 mm |
| Tip temperature | 412 °C |
| Compatible hand piece | MX-DS1 |
| Compatible systems | MX-500, MX-5000, MX-5200 |
| Weight | 0.1 kg |
Applications
The cartridge is used for standard desoldering work on through-hole components in repair, rework and small batch production, for example when removing connectors, electrolytic capacitors, resistor networks and leaded semiconductors.
Compatibility and scope of delivery
The cartridge plugs into the MX-DS1 desoldering hand piece and runs on the MX-500, MX-5000 and MX-5200 power units. One STDC-106 desoldering cartridge is supplied per sales unit.
| Manufacturer Nr. | STDC-106 |
|---|---|
| Manufacturer | Metcal |
| Weight | 0.100000 |
| GPSR manufacturer information | OK International Ltd Eagle Close, Chandlers Ford GB-SO53 4NF Hampshire www.metcal.com |
| Article authenticity | Original product |
| Condition of article | New |
| Position sensing | No |
Write Your Own Review
Customers Who Bought This Item Also Bought
