ESD extraction slot DN50 width 200 mm black - Alsident 1-5020-6

At an ESD workstation the extraction hardware must not hold charge itself. The Alsident 1-5020-6 is a 200 mm wide conductive extraction slot for DN50 arms that stands behind the solder joint and pulls fume horizontally out of the breathing zone.

Benefits

• Conductive version for use inside an EPA
• 200 mm capture width for concentrated sources such as soldering and rework benches
• Internal manifold for even extraction across the full slot width
• Tube socket and slot in chromated TCP aluminium for permanent conductivity
• Impact resistant conductive polypropylene on the plastic parts

Technical data

Applications

Typical locations are hand soldering and rework benches in electronics manufacturing, test and repair stations and bonding or dispensing work inside an EPA. It captures solder fume and light gases directly at source.

Compatibility and scope of delivery

The slot pushes onto Alsident extraction arms with a 50 mm tube diameter. Delivery covers the extraction slot in black without arm and without fan.

The conductive version supports workstations operated to IEC 61340-5-1.