Precision hand wire stripper AWG 18 for PVC and PTFE wire, cutting Ø 1 mm - A1-ESD SWS-1000-AWG18

Fine AWG 18 wire is hard to strip cleanly with an adjustable plier without nicking strands. The SWS-1000-AWG18 therefore uses a fixed 1 mm cutting diameter: the blades close to exactly that size and remove only the insulation from conductors of 0.89 to 0.99 mm mm.

Benefits in use

• No nicked conductors: fixed 1 mm cutting diameter matched to AWG 18.
• Exact strip lengths: graduated depth stop and adjustable length stop.
• Long service life: induction-hardened steel blades stay sharp in series work.
• PVC and PTFE: even tough fluoropolymer insulation is cut cleanly.
• Wire guidance through the 2.2 mm face bore, which also limits the maximum cable outer diameter.

Applications

Preparing fine wire and stranded leads in electronics production, wire harness and prototype building, labs, service and board repair. Each conductor size has its own model in the series, so the cut always fits.

Note

This tool is not ESD-safe. In an EPA with ESD requirements to IEC 61340-5-1, use a dissipative tool.