Shim DIN 988 6 x 12 x 0.2 mm for Maestro 2 and 2M depaneling machines, pack of 10 - cab 5903025

On the Maestro 2 and 2M depaneling machines the blade sits on a shaft whose axial position has to be right if the cut is to stay clean. The DIN 988 shim with 6 mm bore, 12 mm outside diameter and 0.2 mm thickness is the spacer for that job. The number of shims fitted sets the dimension in steps of 0.2 mm, with no rework on shaft or bearing.

Key benefits

• Thickness 0.2 mm, which allows the blade position to be set finely and repeatably.
• Standardised DIN 988 shim, plane parallel and free of burrs, so it seats cleanly against the shoulder.
• Dimensions 6 x 12 mm match the blade shaft of the Maestro 2 and 2M.
• Pack of 10 pieces, enough for several settings and as maintenance stock.
• Low-cost wear part that decides the cutting quality of the whole machine.

Applications

Setting up and servicing Maestro 2 and 2M depaneling machines in PCB production, at blade changes and after regrinding.

Compatibility and scope of delivery

Fits the cab Maestro 2 and Maestro 2M depaneling machines. One pack of 10 shims is supplied. cab offers shims in further thicknesses for other gap settings.

Standards and notes

Standardised part to DIN 988. Manufacturer details under GPSR: CAB Produkttechnik, Wilhelm-Schickard-Straße 14, DE-76131 Karlsruhe, www.cabgmbh.com.