Mobile 1-channel soldering station WSM 1 with WMRP micro iron, 50 W, ESD - Weller T0053292399N

For field service and for benches without a permanent soldering station, the decisive factor is how fast the tool is ready. The WSM 1 reaches working temperature in about 5 seconds with the RTM micro tips and delivers 50 W from a housing measuring 137 x 110 x 55 mm.

Benefits in use

• Heat up time of around 5 seconds through the active RTM tip technology, the sensor sits close to the joint and the heat path stays short.
• Temperature accuracy of plus minus 9 degrees Celsius and stability of plus minus 5 degrees Celsius, which keeps soldering profiles reproducible across the shift.
• Temperature lock function, the set point can be secured against accidental adjustment.
• Working range 100 to 400 degrees Celsius at 50 W, enough for micro components as well as for standard joints.
• ESD safe design according to the property table, which covers use inside EPA areas.
• Touch display for operation, temperature and lock are set directly on the unit.

Technical data

Applications

Field service and repair on assemblies, prototype work, laboratory and training, plus rework at benches without a permanent station. The compact footprint of 137 x 110 mm fits onto an occupied test bench, and the ESD safe design allows use in electrostatic protected areas.

Compatibility and scope of delivery

The WSM 1 station is supplied with the micro soldering iron WMRP. Work is done with the active RTM Micro tips, which carry heating element and sensor inside the tip. Which tip is included is not stated in the supplier data.

Standards and safety

According to the property table the station is ESD safe and therefore intended for assembly and repair inside EPA areas to IEC 61340-5-1. A declaration of conformity is not part of the supplier data.