Self-adjusting crimping pliers for wire ferrules 0.08 to 16 mm² with lateral access, 180 mm - Knipex 97 53 04

Anyone fitting ferrule after ferrule in a control cabinet loses most time changing to the matching die. The self-adjusting crimping pliers 97 53 04 set themselves to the inserted ferrule and crimp 0.08 to 16 mm² in one single die.

Benefits

• Automatic adjustment to the wire ferrule size removes the search for the correct crimping profile and rules out using the wrong die.
• One die for the entire range from 0.08 to 16 mm², equal to AWG 28 to 6, also for twin wire ferrules up to 2 x 6 mm² or 2 x AWG 10.
• Square compression according to DIN 46228 parts 1 + 4, with UL approval in conjunction with KNIPEX wire ferrules 97 99 330 to 399.
• Unlockable ratchet and factory calibrated crimping pressure keep the crimp quality identical across a whole run.
• Efficient lever action and a narrow handle width reduce the effort, the tool stays handy at 459 g.
• Special quality chrome vanadium electric steel, oil-hardened, for a long service life of the crimping edges.

Technical data

Areas of use

Control cabinet and control system building, electrical installation and service work on terminal strips. The lateral access pays off wherever cores that are already routed have to be fitted with ferrules in place and there is no room in front of the tool.

Standards and conformity

Crimping follows DIN 46228 parts 1 + 4. In conjunction with KNIPEX wire ferrules 97 99 330 to 399 the tool holds UL approval. According to the manufacturer it contains substances of very high concern under REACH. The RoHS directive does not apply.