Chisel-shaped bent soldering tip 0.4 mm for AL250/AP250 - JBC C250420

The JBC C250420 is a chisel-shaped, bent soldering tip with a 0.4 mm diameter for fine soldering work with the AL250 and AP250 soldering irons. The heater integrated in the cartridge sits directly behind the tip and transfers heat without delay, so working temperature is restored quickly even on densely populated boards.

Benefits

• Heater integrated in the cartridge for instant heat recovery
• Slim 0.4 mm diameter for fine SMD and wire soldering
• Bent tip alignment for a clear view of the joint
• Tip length 9.5 mm, total length 100 mm for balanced reach
• Exact fit for the JBC AL250 and AP250 soldering irons

Technical data

Applications

Fine soldering on PCBs, SMD components and connection wires where a narrow, bent tip is needed for reliable heat transfer in a small area.

Compatibility and scope of delivery

Suitable for the JBC AL250 and AP250 soldering irons. Scope of delivery: 1 soldering tip C250420.

Made in Spain. ESD-safe working in accordance with IEC 61340-5-1.