Laser fume extraction unit Laser Line LL 200V 230 m³/h with CFC flow control - Weller FT91001699N

At laser workstations extraction performance normally falls as the filters load, so capture at the process deteriorates over the service interval. The Laser Line LL 200V laser fume extraction unit counters this with constant flow control (CFC) that trims air flow independently of the degree of filter contamination, at a maximum of 230 m³/h and 3800 Pa.

Benefits

• Constant flow control CFC holds extraction performance independent of the degree of filter contamination
• Up to 4 filter stages with F7 fine dust prefilter (0.5 m²), H13 particle filter and broadband gas filter of 50 % activated carbon and 50 % chemisorb
• Acoustic and optical filter alarm plus effectiveness check via USB port for documented maintenance
• Compact footprint of 320 mm x 320 mm at 230 m³/h extraction capacity
• Low noise level of 52 dBA for continuous operation next to the operator
• RS232 interface for remote control and coupling to the laser controller

Applications

Extraction at laser workstations with small to medium particle loads: laser marking and part labelling, engraving of metal and plastics and laser welding. Suitable for manufacturing cells, laboratories and prototype shops where the cleaned air is returned to the room.

Compatibility and scope of delivery

Scope of delivery: Laser Line LL 200V extraction unit in the 230 V / 50 Hz version with filter set. Available wear parts are the F7 fine dust prefilter and compact filter FT91000008N. Extraction arms, nozzles and hose connections are selected separately to suit the laser system.