Desoldering tip 0.8 mm inner diameter T series - Thermaltronics T60DT003

When removing leaded parts, the bore of the suction tip decides whether the hole really opens up. The T60DT003 from the Thermaltronics T series has a 0.8 mm inner diameter, matched to thin component leads in tight plated through holes.

Benefits

• 0.8 mm inner diameter for fine leads and small vias
• 13 mm tip length for standard access on populated assemblies
• Inductive T series control holds 325-358 °C so the solder stays molten until it is drawn off
• Lead-free and RoHS compliant
• Tool-free change on the DS-GUN-2 desoldering gun

Applications

Removing resistors, diodes, capacitors and DIL integrated circuits, clearing plated through holes before refitting, and repairing older assemblies with thin component leads.

Compatibility and scope of delivery

The cartridge belongs to the T desoldering tip series, works in the DS-GUN-2 desoldering gun and runs on the Thermaltronics TMT-5000S-1 and TMT-5000S-2 stations. One T60DT003 desoldering cartridge is supplied.