Soldering tip chisel extra wide 5.0 mm T series - Thermaltronics TM60CH250

Joints with very high thermal drain are not solved by raising temperature but by increasing contact area. The 5.0 mm edge of this T cartridge puts that area on the workpiece and, at 7.5 mm of tip length, brings the mass needed to sustain it.

Benefits

• Widest chisel face in the T series at 5.0 mm contact width
• Large thermal reserve for copper areas, tabs and heavy cable
• 7.5 mm tip length balances reach against stiffness
• 325-358 °C working range with no setting effort on the station
• Lead-free capable and RoHS compliant

Applications

Tinning and soldering busbars, shielding enclosures, ground points and large cable cross sections that narrower tips only wet after long dwell times. Also suited to power electronics repair.

Compatibility and scope of delivery

The cartridge belongs to the T series and is used in the SHP-T hand piece on the TMT-5000S-1 and TMT-5000S-2 stations. One soldering tip is supplied.