Soldering tip chisel 30° 2.5 mm T series - Thermaltronics TM80CP200

On ground planes and heavy component leads the deciding factor is heat recovery rather than set temperature. Cartridge tip TM80CP200 answers that with a 2.5 mm chisel face ground at 30° and works within the T series operating window of 420-475 °C.

Benefits

• Chisel face 2.5 mm (0.10 in) with a 30° grind transfers far more heat than a conical tip of the same power class
• Short tip length of 6.4 mm (0.25 in) shortens the path between heating zone and joint
• Inductive Curie point control of the T series holds tip temperature inside 420-475 °C without calibration
• Heater, sensor and tip form one cartridge, exchanged tool-free in the SHP-T hand piece
• RoHS compliant and rated for lead-free alloys

Applications

Assembly and rework of through-hole parts, soldering pin and socket headers, attaching stranded wire to solder lugs and any board work involving copper pours. The 2.5 mm width also suits drag soldering of multi-pin SMD packages.

Compatibility and scope of delivery

The cartridge fits the SHP-T hand piece and runs on the TMT-5000S-1 and TMT-5000S-2 soldering stations. One tip is supplied per order unit.