Soldering tip conical 1.0 mm extra long 16.4 mm T series - Thermaltronics TM70CS154

When the joint sits behind a heat sink or deep inside an enclosure and still needs a substantial tip, the TM70CS154 is the right pick. It combines 16.4 mm of tip length with a 1.0 mm tip width and runs on the Curie point heating of the T series in the 350-398 °C band.

Benefits

• Very long 16.4 mm tip for deep-seated and obstructed joints
• 1.0 mm tip width carries enough heat into pads tied to a ground plane
• Curie controlled at 350-398 °C, so no calibration interval during operation
• Tool-free cartridge change on the SHP-T hand piece
• Lead-free capable and RoHS compliant

Applications

Field repair of assembled equipment, soldering terminals, sockets and wiring harnesses inside housings, and work on boards with tall components around the joint.

Compatibility and scope of delivery

For the SHP-T hand piece and the TMT-5000S-1 and TMT-5000S-2 stations of the Thermaltronics T series. The scope of delivery is one soldering tip cartridge.