Extraction arm DN100 1185 mm 3 joints wall and ceiling mounting - Alsident 100-5545-3-5

The Alsident DN 100 system is designed for larger pollutant volumes and larger capture tasks, with a 100 mm tube diameter and 140-400 m³/h. This System 100 AL version reaches 1185 mm over three joints and can be fitted to a wall or to the ceiling.

Benefits

• Reach of 1185 mm with three joints, supported by two gas springs for easy overhead adjustment
• Recommended air volume 140-400 m³/h at 100 mm tube diameter
• Anodised aluminium tubes with 10μ layer thickness, joints in impact-resistant, chemically resistant polypropylene
• Integrated throttle valve that sits clear of the air stream when open to preserve maximum flow
• Threaded rods, springs and thumbscrews in acid-resistant AISI 316L stainless steel, acid-resistant POP rivets for long life in aggressive environments

Applications

The arm is used above machines and process lines, at soldering and welding positions with heavy fume, over cleaning and coating stations, and in laboratories where the bench surface must stay free of stands.

Compatibility and scope of delivery

The arm belongs to the Alsident System 100 AL and accepts the DN100 hoods and suction nozzles of the range. Supplied is the extraction arm with three joints and two gas springs for wall or ceiling mounting. A protective grille preventing foreign bodies from being drawn in is available as an accessory. This version is not ESD safe, the conductive system variant is intended for EPA areas.