ESD high-impedance meter set, multi-voltage with temperature and humidity - Safeguard MegaGuard ProPlus

The Safeguard MegaGuard ProPlus is the top model of the MegaGuard range: a portable multi-voltage high-impedance meter with integrated temperature and humidity measurement. It measures resistance between two points as well as leakage and surface resistance per IEC 61340-5-1 and selects between four test voltages (10, 100, 250 and 500 V) as required. Up to 100 readings can be stored in internal memory.

Your benefits

• Four test voltages (10, 100, 250, 500 V) cover low to very high resistances
• Integrated temperature and humidity measurement documents the conditions of every reading
• Internal memory for 100 readings eases auditing and traceability
• About 1500 readings at 500 V per battery set for long service
• Large graphic LCD (68 x 51 mm, 128 x 64 pixels) for comfortable reading
• Operating from -20 °C to +60 °C, in a conductive case with dissipative foam

Technical data

• Manufacturer part number: SG9265064
• Display: graphic LCD, 128 x 64 pixels, 68 x 51 mm
• Test voltages: 10, 100, 250, 500 V
• Range at 10 V: 1 kOhm to 50 GOhm
• Range at 500 V: 1 MOhm to 1 TOhm
• Humidity (measurement): 1 to 95 % RH
• Operating temperature: -20 °C to +60 °C
• Internal memory: 100 readings
• Battery life: approx. 1500 readings at 500 V

Scope of delivery

• 1 MegaGuard ProPlus meter
• 2 shielded probes
• 1 probe handle (25 cm)
• 2 shielded connection cables
• Carry strap, batteries
• ISO 9000 calibration certificate
• Conductive case with dissipative foam

Applications

• Detailed resistance measurement with selectable test voltage per material
• Audits with documented environmental conditions (temperature, humidity)
• Point-to-point, leakage and surface resistance measurement in the EPA

Standards and compliance

Measures per IEC 61340-5-1. Complies with the EMC directive 2014/30/EU and meets DIN EN 61340-5-1, DIN EN 60204-1, DIN EN 61000-6-1 and DIN EN 61000-6-3.