ESD Kapton polyimide tape 10 mm x 33 m, dissipative, up to 300 °C

For day-to-day solder masking on printed circuit boards, 10 mm is the most common tape width. This dissipative polyimide tape protects pads, plated holes and connector contacts during wave soldering and stays stable up to 300 °C for short periods.

Benefits

• 10 mm width as the standard format for most masking jobs at the bench
• short-term temperature resistance up to 300 °C, suited to wave soldering and rework
• dissipative material, no charging when peeled inside the EPA
• residue-free removal and chemical resistance
• 33 m per roll, core Ø 76 mm for hand and bench dispensers

Applications

Masking contact surfaces, plated holes and connector contacts before wave soldering, shielding neighbouring components during hot air rework, fixing thermocouples for profile measurement and masking during coating.

Compatibility and scope of delivery

One roll of 10 mm width and 33 m length on a core with 76 mm inner diameter. The same series offers widths of 6, 8, 12, 15, 19 and 25 mm.

The dissipative tape material is intended for use in EPA areas according to IEC 61340-5-1.