Bent needles and suction cups set 30G/25G/20G for Pick & Place T260, NBC260 - JBC 26490

When placing and repositioning SMD components, the right pickup determines placement accuracy. This accessory set adapts the vacuum pickup to the weight and size of almost any component, so parts of different sizes can be positioned precisely on the board.

Benefits

• Three bent needles in 30G (Ø 0.159 mm), 25G (Ø 0.26 mm) and 20G (Ø 0.60 mm) for fine to larger SMD parts.
• All needles bent at 60° for a clear view of the component during pickup.
• Two suction cups (4.3 x 0.5 mm) adapt to the needles and ease placement of differently sized SMD.
• Suitable for the JBC T260 vacuum pipette and NBC260 Pick & Place, and supplied with the JNA high-precision hot air station.

Applications

Picking up and placing SMD components of different sizes in electronics manufacturing, rework and laboratory use.

Compatibility & scope of supply

Suitable for the JBC T260 vacuum pipette, the NBC260 Pick & Place and the JNA high-precision hot air station. Scope of supply: 2x 30G needles, 2x 25G needles, 2x 20G needles, 2x suction cups. When mounting the cup on the needle, make sure the needle does not protrude from the bottom.

Manufactured by JBC, origin Spain.