Lanyard approx. 90 cm for tools up to 1.5 kg, stretches to 1.5 m - Knipex 00 50 01 T BK

Anyone working at height, in a shaft or on a rope has to secure every tool against falling. The 00 50 01 T BK lanyard is tested in numerous drop tests for a tool weight of 1.5 kg, measures roughly 90 cm when gathered and stretches to about 1.5 m under load.

Benefits

• Reliable tool protection with holding capacity for tools up to 1.5 kg proven in numerous drop tests.
• Large working radius because the gathered fabric strap extends from around 90 cm to about 1.5 m.
• Sewn flat belt loop at one end and a cord with cord stopper at the other, which gives two different ways of attaching the tool.
• Attaches directly by the cord side or by a carabiner to climbing equipment and fixed points, so the belay moves quickly from the tool bag to the lanyard.
• Suitable for all KNIPEX pliers with a tether attachment point.
• Reduces the risk of tool loss, injury to people or animals and damage to objects.

Areas of use

Industrial climbing, shaft work, rescue services, arboriculture, bridge refurbishment, wind power and work at sea. It pays off wherever a falling tool would endanger people, damage equipment or drop into an area that cannot be reached.

Standards and conformity

The lanyard is explicitly not personal protective equipment and is not suitable for securing people, it serves tool protection only. According to the manufacturer it contains no substances of very high concern under REACH, and the RoHS directive does not apply.