Circlip pliers for internal circlips in bore holes, angled 45°, Ø 8 - 13 mm, tips Ø 0.9 mm, 140 mm - Knipex 44 31 J02

Internal circlips sit under tension in the bore and jump out of the ring eyes easily when the tool is applied. The 44 31 J02 circlip pliers grip rings in bores of Ø 8 - 13 mm and work with non-slip tips of Ø 0.9 mm, so the ring stays in the pliers during fitting and removal.

Benefits

• Working range Ø 8 - 13 mm, a clearly defined bore range instead of a compromise across all ring sizes.
• Tips angled by 45°, so the pliers reach bores that are covered when approached head on.
• Solid forged style, it takes up the spreading force even with tightly seated circlips.
• Non-slip solid tips of Ø 0.9 mm engage the ring eyes and do not slip out while the ring is spread.
• Pliers black atramentized with a polished head, a dark closed surface with the working head left bright.
• Plastic coated handles give a secure grip during repeated opening.
• Overall length 140 mm at 90 g, handy enough for work directly on the installed part.

Areas of use

Precision mechanics, repair of power tools and small gearboxes, and assembly points where the bore can only be reached from the side.

Standards and conformity

The manufacturer does not state a tool standard for this model. According to the manufacturer the pliers contain no substances of very high concern under REACH. The RoHS directive does not apply.