Crimping pliers for insulated and non-insulated wire end ferrules, two-hand operation, 250 mm, self-service pack - Knipex 97 52 09 SB

Ferrules on large cross-sections demand hand force, and that is exactly where crimps often stay incomplete. Crimping pliers 97 52 09 SB process insulated and non-insulated wire end ferrules with precision dies, their lever transmission cuts the hand force required by up to 30 percent, and for heavy conductors the tool can be guided with both hands.

Benefits

• Handles insulated and non-insulated wire end ferrules with the same tool, no changeover needed.
• Two-hand operation for crimping large conductor cross-sections that are hard to close cleanly with one hand.
• Lever transmission takes up to 30 percent off the hand force, which pays off with every further ferrule.
• Precision dies and an unlockable ratchet keep crimping quality constant across a whole series.
• Crimping pressure is set and calibrated at the factory, so no readjustment is needed.
• Balanced centre of gravity, angled head and ergonomic handles at 250 mm overall length, the crimping die is fixed in place.

Areas of use

Control cabinet and control system building, machine and plant wiring, power distribution and service work on existing installations, wherever larger conductor cross-sections are terminated on clamps with ferrules. The SB version is aimed at shelf and counter sale.

Note on the technical data

The manufacturer publishes no separate data page for the SB version. It differs from the base version 97 52 09 in the self-service packaging. As weight, dimensions and EAN of the packed variant are not documented, this description deliberately carries no table of individual values. The overall length of 250 mm is taken from the catalogue designation.