Crimping pliers for non-insulated open plug connectors 6.3 mm, 0.5 to 2.5 mm², 230 mm - Knipex 97 21 215 B

Anyone fitting open plug type connectors needs an even crimping force and does not want to swap tools for every step. The 97 21 215 B crimping pliers press non-insulated open plug connectors with a 6.3 mm plug width in three nests from 0.5 to 2.5 mm², and they cut and strip the conductor as well.

Benefits

• Three crimping nests for non-insulated open plug type connectors from 0.5 to 2.5 mm², matching AWG 20 to 14.
• Cable cutter and stripping holes in the same tool, which saves a tool change at the terminal.
• Threaded holes for cutting copper and brass screws threaded M 2.6 / M 3 / M 3.5 / M 4 and M 5.
• Bolted joint for high stability and even movement throughout the service life.
• Multi-component grips on the handles for a secure hold over the 230 mm lever length.

Areas of use

Vehicle and trailer electrics, machine and plant construction, control cabinet building and service work on wiring harnesses, wherever open blade terminals with a 6.3 mm plug width are used.

Standards and conformity

The manufacturer does not state a tool standard for these pliers. According to the manufacturer they contain no substances of very high concern under REACH, and the RoHS directive does not apply.