Self-adjusting crimping pliers for wire end ferrules For crimping wire end ferrules according to DIN 46228 Parts 1 + 4. Self-adjusting adjustment to the required wire end ferrule size: no crimping errors due to using the wrong crimping insert. Frontal insertion of the wire-end ferrules into the tool. Consistently high crimp quality due to positive ratchet (can be unlocked). Crimp pressure is precisely set (calibrated) at the factory, adjustable. Force amplification by knee lever for fatigue-free working. High operating comfort due to handy design and low weight. Crimping from 0.08 to 10.0 mm² in one profile. Wire end ferrules up to 2.5 mm² can be fed in parallel from the side. especially suitable for all twin wire end ferrules up to 2 x 4 mm² or 2 x AWG 10. - Application: Wire end ferrules - Capacity square millimetres: 0.08 - 10mm² - Number of nests: 1 - AWG: 28 - 7.
For crimping wire end ferrules according to DIN 46228 part 1 + 4
Self-adjusting adjustment to the required wire end ferrule size: no crimping errors due to use of the wrong crimp insert
Frontal insertion of the wire end ferrules into the tool
Consistently high crimp quality due to positive ratchet (can be unlocked)
Crimp pressure is precisely set (calibrated) at the factory, adjustable
Force amplification through toggle lever for low-fatigue work
High operating comfort due to handy design and low weight
