Crimping pliers for twin wire end ferrules 6, 10 and 16 mm², two-hand operation, 250 mm - Knipex 97 52 18

Two conductors in one terminal only hold reliably when the twin ferrule is crimped cleanly all round. Crimping pliers 97 52 18 cover the sizes 2 x 6, 2 x 10 and 2 x 16 mm² with three nests, and their lever transmission takes up to 30 percent off the hand force.

Benefits

• Three nests for twin wire end ferrules 2 x 6, 2 x 10 and 2 x 16 mm², which corresponds to AWG 2 x 10 to 2 x 6.
• Lever transmission reduces hand force by up to 30 percent compared with regular crimping pliers.
• Precision dies and an unlockable ratchet keep crimping quality constant across a whole series.
• Crimping pressure is set and calibrated at the factory, so nothing has to be readjusted.
• Two-hand operation makes crimping the large cross-sections easy on the hands.
• A balanced centre of gravity, an angled head and non-slip coated handles give a firm hold at 250 mm and 571 g.

Areas of use

Control cabinet and control system building, power distribution, machine and plant wiring and modifications to existing distribution boards, wherever two conductors are terminated together on one clamp.

Standards and conformity

The manufacturer states no tool standard for this product. According to the manufacturer the pliers contain substances of very high concern under REACH. The RoHS directive does not apply. The crimping die is fixed and cannot be exchanged.