ESD interchangeable tips straight, pointed, tip width 0.4 mm, for tweezers 92 81 02, 40 mm - Knipex 92 89 02

Anyone placing electronic components, micro-mechanical parts or glass and ceramic parts by hand needs a tip that neither scratches nor builds up a static charge. These 40 mm interchangeable tips are screwed onto the 92 81 02 tweezers and have a surface resistance between 10² and 10⁴ ohms.

Benefits

• Tips made of 30 % carbon fibre reinforced plastic, electrically and thermally highly conductive, scratch-proof and with high abrasion resistance.
• Surface resistance between 10² and 10⁴ ohms for controlled compensation of potential differences between operator and component, dissipative behaviour and ESD tested.
• Permanently temperature stable up to 130 °C and up to 190 °C for short periods, so they can be used at the soldering bench.
• Fully elastic, fatigue-resistant, vibration-dampening and water-repellent, with good chemical resistance to most oils, lubricants, fuels and non-polar solvents.
• Backlash-free 3-point connection with two fixed points on the arms and one screw, so the tip sits as accurately as on a regular pair of tweezers.
• Straight design with a pointed end, tip width 0.4 mm (A) and 0.6 mm (B), for fine gripping work under the microscope.

Areas of use

Electronics manufacturing and assembly repair, precision engineering, watchmaking and jewellery workshops. Useful wherever delicate surfaces must stay unmarked and the workplace follows ESD rules. Because only the tips are replaced, the body of the tweezers stays in service.

Standards and conformity

The manufacturer does not state a tool standard for this product. The tips are ESD tested and dissipative, there is no VDE approval. According to the manufacturer they contain no substances of very high concern under REACH, the RoHS directive does not apply.