ESD table mat set, 5-piece, gray, 600 x 900 mm, with wrist strap and coil cord - Weller T0051403799

A workstation only becomes ESD safe once mat, personnel grounding and connection points match each other. This Weller set delivers all five parts in one package and covers the working area of a typical test and soldering bench with a mat of 600 x 900 mm.

Benefits in use

• Two layer build of a dissipative and a conductive layer, with a typical surface resistance of 10⁶ to 10⁸ ohms and therefore inside the dissipative range.
• Heat and solder resistant surface, so dropped solder beads and hot components leave no lasting damage.
• Resistant to oil and chemicals, permanently elastic and abrasion resistant, so the mat keeps its shape even after frequent cleaning.
• Personnel grounding included, with the wrist strap on a 10 mm push button and the 1 MOhm coil cord already matched to each other.
• Anti reflective surface in gray, which makes work under a magnifier lamp or microscope easier.
• Sales unit of 1 set, so one workstation is equipped with a single order line.

Technical data

Applications

Soldering and repair benches in electronics production, incoming inspection, laboratories and training. Also in field service, where an EPA has to be set up at short notice on someone else's table.

Compatibility and scope of delivery

The delivery covers the gray ESD table mat of 600 x 900 mm, an ESD wrist strap with a 10 mm push button, an ESD coil cord with 1 MOhm and two 10 mm push buttons. A grounding block or an earth bonding lead to protective earth is not part of the set and is added to suit the existing installation.

Standards and compliance

The mat is RoHS compliant. The stated surface resistance of 10⁶ to 10⁸ ohms sits in the dissipative range that is common for working surfaces inside an EPA. A test report per batch is not part of the supplier data.