ESD table mat set, gray, 600 x 900 mm, with two 10 mm snap fasteners - Weller T0051403599

Anyone who has already standardised wrist straps and coil cords needs only the working surface when adding a bench. This Weller table mat measures 600 x 900 mm, comes with two 10 mm snap fasteners for connection and fits into an existing grounding installation.

Benefits in use

• Two layer build of a dissipative and a conductive layer, with a typical surface resistance of 10⁶ to 10⁸ ohms and therefore inside the dissipative range.
• Two 10 mm snap fasteners are included, one connection goes to ground while the second stays free for the operator's wrist strap.
• Heat and solder resistant surface, so dropped solder beads and hot components leave no lasting damage.
• Resistant to oil and chemicals, permanently elastic and abrasion resistant, so the mat keeps its shape even after frequent cleaning.
• Anti reflective surface in gray, which makes work under a magnifier lamp or microscope easier.

Applications

Soldering and repair benches in electronics production, incoming inspection, laboratories and training. Particularly useful when extending an existing EPA in which wrist strap and grounding block are already defined.

Compatibility and scope of delivery

The delivery covers the gray ESD table mat of 600 x 900 mm and two 10 mm snap fasteners. Wrist strap, coil cord and earth bonding lead are not included and are added to suit the existing installation.

Standards and compliance

The mat is RoHS compliant. The stated surface resistance of 10⁶ to 10⁸ ohms sits in the dissipative range that is common for working surfaces inside an EPA. A test report per batch is not part of the supplier data.