Nano soldering tip knife shaped 2.8 x 0.2 mm for NT105 and NP105 - JBC C105129

Soldering fine pitch rows pin by pin costs time and invites bridges. This cartridge carries a 2.8 mm knife blade of 0.2 mm thickness, wide enough to drag solder across a complete row. The 20 degree bevel leaves the joint visible under a microscope.

Benefits in detail

• Blade width 2.8 mm at 0.2 mm thickness, made for drag soldering closely spaced leads.
• Cartridge design of the C105 series, the smallest JBC range, intended for very small components at high precision.
• Heater and tip form one unit, which gives instant heat up and short recovery times.
• The 20 degree bevel keeps the handpiece out of the line of sight under the microscope.
• According to the manufacturer, Long Life Tips together with the Sleep and Hibernation functions reach several times the usual service life.
• Fits both the NT105 nano soldering iron and the NP105 nano tweezers.

Technical data

Applications

Soldering and repairing very small components, work under the microscope, drag soldering of fine pitch leads, prototype building and laboratory work on densely populated assemblies.

Compatibility

For use with the NT105 nano soldering iron and the NP105 nano tweezers. C105 cartridges are not interchangeable with the C115 or C245 series.