AirFree lamella plug with venting pin for 600 ml cartridge - Nordson EFD 7702765

Air between the material and the plug shifts the mixing ratio in two component systems and only shows up on the cured part. The AirFree plug for the 600 ml cartridge lets that air escape around the integrated venting pin as it is pressed on and then closes by itself.

Benefits in use

• Integrated venting pin, so fitting a separate pin afterwards and the second operation are no longer needed.
• Lamella geometry guides the air trapped between material and plug fully to the outside.
• Self closing through the force generated when the plug meets the material.
• In the closed state the black venting pin sits flush with the plug surface, which gives the operator a visual check.
• PE and PBT material combination, compatible with most adhesives and sealants.
• Designed for cartridges with 600 ml content.

Applications

Filling and storing one and two component adhesives, sealants and potting compounds in 600 ml cartridges, small series production, laboratory and prototype work.

Compatibility

For cartridges with 600 ml content. The PE and PBT material combination is compatible with most adhesives and sealants, with aggressive media the resistance should be checked in advance.

Standards and compliance

The property table does not list the plug as ESD safe.