Combination wrench 13 mm, double hexagon, 15° offset head - Bahco 111M-13

When covers, wiring looms or frame sections limit the swing, head height decides whether the wrench reaches the nut at all. The 111M-13 measures just 7.6 mm overall and brings 13 mm across flats to the joint over a length of 169 mm.

Benefits in use

• 13 mm across flats on both the open end and the ring, 169 mm overall length keeps leverage and access in balance.
• Jaw set at 15° with an overall height of only 7.6 mm, so the wrench re-engages even where the swing angle is small.
• Ring end offset by 15°, the hand stays clear of the surrounding assembly.
• Double hexagon with Dynamic-Drive profile, load is carried by the flats of the nut instead of its corners.
• U-shaped shank in high-performance steel alloy with a chrome micro-matt finish, oil resistant and easy to wipe clean.
• Large size marking stamped on both sides, the width is readable at a glance in the tool trolley.

Technical data

Applications

Machine and plant assembly, maintenance on drives, pumps and cabinet frames, vehicle and two-wheeler work as well as service trolleys that need a slim 13 mm wrench.

Scope of delivery

One Bahco 111M-13 combination wrench, 13 mm across flats, supplied singly.

Standards and compliance

The wrench follows ISO 691, ISO 7738, ISO 3318 and ISO 1711-1 as well as DIN 3113. The manufacturer property table lists neither ESD capability to IEC 61340-5-1 nor a VDE test to IEC 60900. Use appropriately approved tools on ESD sensitive assemblies or on live parts.